YOUVI distinguishes devices when reading out the ETS project according to their communication objects, flags, and data types. A minimum number of communication objects is required for each device to be recognized, for example, as a roller shutter. Only when the communication objects are correctly defined can the device be properly identified and controlled.

Note: Communication objects that exclusively use the data type '1.001 (switching)' are automatically assigned as a light in YOUVI. If the defined object is intended to be a different device, the device type must then be changed in the visualisation settings.

In order to have your devices successfully recognized from an existing ETS project by YOUVI, we have summarized the following help tools for you in text and table form:

YOUVI Manual Chapter 17 - Supported KNX devices

YOUVI Manual Chapter 18 - Tips for your ETS project

You will also find nine points regarding your ETS project to be considered in advance.