Control 12 Adapter for Gira-Control-9 flush-mounted box
You are no longer satisfied with your KNX control panel? Then exchange it for our 11.6-inch KNX touch panel Control 12! Thanks to the matching adapter, both KNX touch panels can be exchanged without any problems.
You can find the whole replacement set here.
Please note: The Control 12 requires a power supply of 24 V DC/2.4 A. To use the Control 12 in the corresponding flush-mounted box, an additional power supply may be necessary.
These special adapters enable the Control 12 to be mounted in the existing Gira-Control-9 flush-mounted box (Client 1 and 2). Thanks to flush-mounted installation of the 11.6-inch Control 12, it lies ultra-flat on the wall with a wall distance of only a few millimetres.
The adapters are attached directly to the Control-9 flush-mounted box to hold the Control 12 in place – no need to drill new holes.
PEAKnx Tutorial Control 12 Adapter for Gira Control 9 flush mounted box
To install the Control 12, you can alternatively use the flush-mounted box of the Gira Control 9 in addition to our flush-mounted box - for this, you need our matching PEAKnx adapters. In our video tutorial (in german) we explain step by step the installation of the Control 12 in a flush-mounted box of the GIRA Control 9.
- Adapter for GIRA-Control-9 flush-mounted box
- 4 pcs. M3x12 countersunk screws
- Dimensions (W x H x D): 166 mm x 49 mm x 33 mm
- Weight: 47 g
